B26E9

B26E9 STEERING STATUS





Description
There are 2 switches in the steering lock unit (steering lock/unlock switch 1 and 2). BCM compares those 2 switches conditions to judge the present steering status.




DTC Logic

DTC DETECTION LOGIC

NOTE:
- If DTC B26E9 is displayed with DTC B2609, first perform the trouble diagnosis for DTC B2609. Refer to B2609.

DTC Detection Logic:

DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Turn ignition switch OFF.
3. Press driver side door switch and wait for at least 1 second.
4. Turn ignition switch ON.
5. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - Refer to B26E9.
NO - INSPECTION END




Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Check "Self diagnostic result" with CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure. Refer to B26E1.
Is the DTC B26E9 displayed again?
YES - GO TO 2.
NO - GO TO 3.
2.REPLACE STEERING LOCK UNIT
1. Replace steering lock unit.
2. Perform DTC confirmation procedure. Refer to B26E9.
Is the DTC B26E9 displayed again?
YES - GO TO 3.
NO - INSPECTION END
3.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END