Removal and Installation

FRONT COMBINATION LAMP


Removal and Installation


REMOVAL

CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1. Remove the front bumper fascia. Refer to Exploded View.
2. Remove the headlamp mounting bolts.
3. Remove the holding clip (A)* and the harness clip (B).





*: Left side only
4. Pull out the headlamp assembly forward the vehicle.
5. Disconnect the connector before removing the headlamp assembly.

INSTALLATION
Install in the reverse order of removal.

NOTE:
After installation, perform aiming adjustment. Refer to Adjustments.