Component Inspection (RAS Motor Relay)

POWER SUPPLY AND GROUND CIRCUIT


Component Inspection (RAS Motor Relay)

1.CHECK RAS MOTOR RELAY
1. Turn the ignition switch OFF.
2. Remove RAS motor relay connector.
3. Apply 12 V to RAS motor relay connector No. 1 terminal and No. 2 terminal.

CAUTION:
- Never make the terminals short.
- Connect the fuse between the terminals when applying the voltage.
4. Check the continuity between RAS motor relay connector terminals.





5. Check the resistance between RAS motor relay connector terminals.





Is the inspection result normal?
YES - INSPECTION END
NO - Replace RAS motor relay.