Front Window Anti-Pinch

POWER WINDOW MOTOR


PASSENGER SIDE : Description

Door glass moves UP/DOWN by receiving the signal power window main switch or front power window switch
(passenger side).




POWER WINDOW MOTOR


PASSENGER SIDE : Diagnosis Procedure

1.CHECK FRONT POWER WINDOW MOTOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window motor (passenger side) harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK POWER WINDOW MOTOR
Check front power window motor (passenger side). Refer to Front Window Anti-Pinch.
Is the inspection result normal?
YES - GO TO 4.
NO - Replace front power window motor (passenger side). Refer to Removal and Installation.
3.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.





4. Check continuity between front power window switch (passenger side) connector and ground.





Is the inspection result normal?
YES - Replace front power window switch (passenger side). Refer to Front Window Anti-Pinch.
NO - Repair or replace harness.
4.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END