C1707

C1704, C1705, C1706, C1707 LOW TIRE PRESSURE





Description





The transmitter (1) is installed at the position of the air valve on the road wheel (2). It measures the tire pressure and transmits the tire pressure information by radio waves.




DTC Logic

DTC DETECTION LOGIC

DTC Detection Logic:

DTC REPRODUCTION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. Perform self-diagnosis of the low tire pressure warning control unit.
Is DTC "C1704", "C1705", "C1706", or "C1707" detected?
YES - Perform trouble diagnosis. Refer to C1704.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK TIRE PRESSURE
Check the air pressure of all wheels. Refer to [1][2]Pressure, Vacuum and Temperature Specifications.
Is the inspection result normal?
YES - Replace any malfunctioning transmitters.
NO - After adjusting the air pressure, GO TO 2.
2.CHECK TIRE PRESSURE SIGNAL
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. Within 5 minutes, use CONSULT-III "DATA MONITOR" to display the tire pressure for all wheels.
3. Check that the tire pressures match the standard value.





Is the inspection result normal?
YES - INSPECTION END
NO - Repair or replace error-detected parts.