Navigation (Twin Monitor)

ANTENNA BASE


Removal and Installation


REMOVAL
1. Remove headlining (rear). Keep a service area. Refer to Exploded View.
2. Remove antenna base mounting nut.
3. Disconnect connector and remove antenna base.

INSTALLATION
Installation is the reverse order of removal.

Antenna base mounting nut : 6.5 Nm (0.66 kg-m, 58 in-lb)


CAUTION:
Be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may be deformed, when roof antenna mounting nut tightening torque is loose.