System Description

INFINITI VEHICLE IMMOBILIZER SYSTEM-NATS


System Description

- The IVIS (NATS) is an anti-theft system by registering an Intelligent Key ID in to the vehicle and prevents the engine being started by an unregistered Intelligent Key. It has a higher protection against auto thefts that duplicate mechanical key.
- It performs the ID verification when starting the engine in the same way as the Intelligent Key system. But, it performs the IVIS (NATS) ID verification when inserting the Intelligent Key and performs the Intelligent Key
ID verification when carrying the Intelligent Key.
- The mechanical key integrated in the Intelligent Key cannot start the engine. When the Intelligent Key battery is discharged, the IVIS (NATS) ID verification memorized to the transponder integrated with Intelligent
Key is performed by inserting the Intelligent Key into the key slot. If the verification results are OK, the engine start operation can be performed by the push-button ignition switch operation.
- Locate the security indicator lamp and apply the anti-theft system equipment sticker, forewarn that the IVIS
(NATS) is on-board with the model.
- The security indicator lamp always blinks when the power supply position is in LOCK and ACC.
- Up to 4 Intelligent keys can be registered (Including the standard ignition key) on request from the owner.
- The specified registration is required when replacing ECM, BCM or Intelligent Key. The registration procedure for IVIS (NATS) and registration procedure for Intelligent Key when installing the BCM, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
- Possible symptom of IVIS (NATS) malfunction is "Engine can not start". The engine can be started with the
Intelligent Key system and IVIS (NATS). Identify the possible causes according to "Work Flow", refer to Work Flow.
- If ECM other than Genuine NISSAN is installed, the engine cannot be started. For ECM replacement procedure, refer to Special Repair Requirement.

PRECAUTIONS FOR KEY REGISTRATION
- The key registration is a procedure that erases the current IVIS (NATS) ID once, and then re-registers a new
ID operation. Therefore the registered Intelligent Key is necessary for this procedure. Before starting the registration operation collect all registered Intelligent Keys from the customer.
- When registering the Intelligent Key, perform only one procedure to simultaneously register both IDs (IVIS
"NATS" ID registration and Intelligent Key ID registration).
The IVIS (NATS) ID registration is the procedure that registers the ID stored in the transponder (integrated in
Intelligent Key) to BCM.
The Intelligent Key ID registration is the procedure that registers the ID to BCM.
- When performing the Intelligent Key system registration only, the engine cannot be started by inserting the key into the key slot. When performing the IVIS (NATS) registration only, the engine cannot be started by the pressing the push-button ignition switch operation when carrying the Intelligent Key. The registrations of both systems should be performed.

SECURITY INDICATOR LAMP
- Warns that the vehicle is equipped with IVIS (NATS).
- The security indicator lamp always blinks when the ignition switch is in the LOCK and ACC position.

NOTE:
Because security indicator lamp is highly efficient, the battery is barely affected.