Special Repair Requirement (Preparation)

INSPECTION AND ADJUSTMENT


LASER BEAM AIMING ADJUSTMENT : Special Repair Requirement (Preparation)

1.ADVANCE PREPARATION FOR LASER BEAM AIMING ADJUSTMENT
1. Adjust all tire pressure to the specified value.
2. Empty the vehicle. (Remove any luggage from the passenger compartment, luggage room, etc.)
3. Shift the selector lever to "P" position, and release the parking brake.
4. Fully fill the fuel tank, and then check that the coolant and oils are filled up to correct level.





5. Clean off the ICC sensor integrated unit body window with a soft cloth.
- Go to Special Repair Requirement (Setting the ICC Target Board).