System Description

AUTOMATIC DRIVE POSITIONER SYSTEM


MANUAL FUNCTION : System Description


OUTLINE
The driving position (seat, steering column and door mirror position) can be adjusted manually with power seat switch, tilt and telescopic switch and door mirror remote control switch.

OPERATION PROCEDURE
1. Turn ignition switch ON.
2. Operate power seat switch, tilt and telescopic switch or door mirror remote control switch.
3. The driver seat, steering column or door mirror operates according to the operation of each switch.

DETAIL FLOW

Seat






Tilt and Telescopic






Door Mirror






NOTE:
The door mirrors can be operated manually when ignition switch is in either ACC or ON position. The ignition switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and from the driver seat control unit to the automatic drive positioner control unit via UART communication.