Without Navigation

RGB AREA (YS) SIGNAL CIRCUIT


Description

Transmits the display area of RGB image displayed by AV control unit with RGB area (YS) signal to front display unit.




RGB AREA (YS) SIGNAL CIRCUIT


Diagnosis Procedure

1.CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front display unit connector and AV control unit connector.
3. Check continuity between front display unit harness connector and AV control unit harness connector.





4. Check continuity between front display unit harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - Repair harness or connector.
2.CHECK RGB AREA (YS) SIGNAL
1. Connect front display unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check signal between front display unit harness connector and ground.





Is the inspection result normal?
YES - Replace front display unit.
NO - Replace AV control unit.