Inspection

ENGINE COOLANT


Inspection


LEVEL
- Check if the reservoir tank engine coolant level is within the "MIN" to "MAX" when the engine is cool.





- Adjust the engine coolant level if necessary.
- Check that the reservoir tank cap is tightened.

LEAKAGE
- To check for leakage, apply pressure to the cooling system with the radiator cap tester and radiator cap tester adapter (commercial service tool) (A).





Testing pressure : Refer to CO-49, "Radiator". Radiator

WARNING:
Never remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from water inlet.

CAUTION:
Higher test pressure than specified may cause radiator damage.

NOTE:
In a case that engine coolant decreases, fill radiator with engine coolant.
- If anything is found, repair or replace damaged parts.