Transmitter ID Registration Procedure
INSPECTION AND ADJUSTMENT
ID REGISTRATION PROCEDURE : Transmitter ID Registration Procedure
1.TRANSMITTER ID REGISTRATION PROCEDURE
With CONSULT-III.
1. Display the "WORK SUPPORT" screen and select "ID REGIST".
Is the transmitter activation tool (J-45295) used for the transmitter ID registration procedure?
YES - GO TO 2.
NO - GO TO 3.
2.TRANSMITTER ID REGISTRATION PROCEDURE (WITH THE TRANSMITTER ACTIVATION TOOL)
1. Turn the ignition switch ON.
2. Select the start button on the "ID REGIST" screen.
3. Contact the transmitter activation tool (J-45295) (1) to the side of the tire at the location to the transmitter.
4. Press and hold the activation tool button while pushing the tool to the tire surface. (approximately for 5 seconds)
CAUTION:
Perform the ID registration procedure starting from the vehicle front left wheel, then repeat the procedure in the order of the front right wheel, rear right wheel, and rear left wheel.
5. When ID registration is completed, check the following pattern at each wheel.
6. After the ID registration procedure for all wheels is completed, press "End" to end ID registration, and check that ID registration for all wheels is completed.
Is the check result normal?
YES - ID registration END.
NO - Performs trouble diagnosis of the Tire Pressure Monitoring System (TPMS). Refer to ID Registration Cannot Be Completed.
3.TRANSMITTER ID REGISTRATION PROCEDURE (WITHOUT THE TRANSMITTER ACTIVATION TOOL)
1. Adjust the tire pressure for all wheels to match the list below.
2. Drive the vehicle at a speed at more than 40 km/h (25 MPH) for 3 minutes or more, then perform the transmitter ID registration procedure.
3. After ID registration for all wheels is completed, press "End" to end ID registration.
4. Adjust the tire pressures for all wheels to the specified value. Refer to [1][2]Pressure, Vacuum and Temperature Specifications.
Is ID registrations for all wheels completed?
YES - ID registration END.
NO - Performs trouble diagnosis of the Tire Pressure Monitoring System (TPMS). Refer to ID Registration Cannot Be Completed.