Component Function Check

SNOW MODE SWITCH


Component Function Check

1.CHECK SNOW MODE SWITCH FUNCTION

NOTE:
If DTC UXXXX are displayed, first perform the trouble diagnosis for DTC UXXXX.
1. Turn ignition switch ON.
2. Select "SNOW MODE SW" in "DATA MONITOR" mode with CONSULT-III.
3. Check "SNOW MODE SW" indication under the following conditions.





Is the inspection result normal?
YES - GO TO 2.
NO - Go to Diagnosis Procedure.
2.CHECK SNOW MODE INDICATOR FUNCTION
1. Turn ignition switch ON.
2. Check the snow mode indicator in the snow mode switch under the following condition.





Is the inspection result normal?
YES - INSPECTION END
NO - Go to Diagnosis Procedure.