Front and Rear Window Anti-Pinch

POWER WINDOW MOTOR


REAR LH : Description

Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window switch LH.




POWER WINDOW MOTOR


REAR LH : Diagnosis Procedure

1.CHECK REAR POWER WINDOW MOTOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear power window motor LH connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor LH harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK REAR POWER WINDOW MOTOR
Check rear power window motor LH. Refer to Front and Rear Window Anti-Pinch.
Is the inspection result normal?
YES - GO TO 4.
NO - Replace rear power window motor LH. Refer to Removal and Installation.
3.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH connector.
3. Check continuity between rear power window switch LH harness connector and rear power window motor
LH harness connector.





4. Check continuity between rear power window switch LH harness connector and ground.





Is the inspection result normal?
YES - Replace rear power window switch LH. Refer to Front and Rear Window Anti-Pinch.
NO - Repair or replace harness.
4.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END