U1500

U1500 LDP) CAM CAN CIR1





DTC Logic

DTC DETECTION LOGIC

DTC Detection Logic:

DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
GO TO 2.
2.DTC CONFIRMATION
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC "U1500" detected?
YES - Refer to U1500.
NO - Refer to How to Perform Efficient Diagnosis For an Electrical Incident.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF LANE CAMERA UNIT
Perform self-diagnosis of lane camera unit with CONSULT-III.
Is any DTC detected?
YES - GO TO 2.
NO - GO TO 4.
2.LANE CAMERA UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of the lane camera unit. Refer to Testing and Inspection.
GO TO 3.
3.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U1500" erased?
YES - INSPECTION END
NO - Replace ABS actuator and electric unit (control unit).
4.PROVISIONAL REPLACEMENT OF LANE CAMERA UNIT
Remove the lane camera unit. Install a normal lane camera unit.
GO TO 5.
5.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U1500" erased?
YES - Replace the lane camera unit.
NO - Replace ABS actuator and electric unit (control unit).