Cluster Lid C

INSTRUMENT PANEL ASSEMBLY


CLUSTER LID C : Removal and Installation


CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL
1. Remove cup holder.





- Pull up to remove cup holder.

2. Remove switch finisher.
- Remove switch finisher fixing screws.
- Disconnect harness connectors.





3. Remove A/T console finisher.
- Place the selector lever in [D] position.
- Remove selector lever knob. Refer to A/T Shift Selector Removal and Installation.
- Lift up backside and pull back.
- Disconnect harness connectors.





4. Remove cluster lid C.
- Remove cluster lid C fixing screws.
- Pull back.
- Disconnect harness connectors.

INSTALLATION
Install in the reverse order of removal.