Check CAN Communication Circuit U1000

PRE-CRASH SEAT BELT


Check CAN Communication Circuit [U1000]

1.CHECK SELF-DIAGNOSTIC RESULT
With CONSULT-III
1. Connect CONSULT-III, and turn ignition switch ON.
2. Touch "PRECRASH SEATBELT" on "SELECT SYSTEM" screen.
3. Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
4. Check display content in self-diagnostic results.
Displayed U1000?
Yes - Refer to CAN System Specification Chart.
No - Inspection END.