Pre-Inspection For Diagnosis

PRE-INSPECTION FOR DIAGNOSIS


Inspection Procedure

1.CHECK CAMERA LENS AND WINDSHIELD
Are camera lens and windshield contaminated with foreign materials?
YES - Clean camera lens and windshield.
NO - GO TO 2.
2.CHECK LANE CAMERA UNIT INSTALLATION CONDITION
Check lane camera unit installation condition (installation position, properly tightened, a bent bracket).
Is it properly installed?
YES - GO TO 3.
NO - Install lane camera unit properly, and perform camera aiming. Refer to .
3.CHECK VEHICLE HEIGHT
Check vehicle height.
Is vehicle height appropriate?
OK - INSPECTION END
NG - Repair vehicle to appropriate height.