Consult-III Function (Multi AV)

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


CONSULT-III Function (MULTI AV)


CONSULT-III FUNCTIONS
CONSULT-III performs the following functions via the communication with the AV control unit.






AV COMMUNICATION
When "AV communication" of "CAN Diag Support Monitor" is selected, the following function will be performed.






ECU IDENTIFICATION
The part number of AV control unit is displayed.

SELF DIAGNOSIS RESULT
- In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed collectively.
- The current malfunction indicates "CRNT". The past malfunction indicates "PAST".
- The timing is displayed as "0" if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected.
The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.

Self-diagnosis results display item

Self-diagnosis results display item (Part 1):

Self-diagnosis results display item (Part 2):

Self-diagnosis results display item (Part 3):

DATA MONITOR

ALL SIGNALS
- Displays the status of the following vehicle signals inputted into the AV control unit.
- For each signal, actual signal can be compared with the condition recognized on the system.






SELECTION FROM MENU
Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.