Check CAN Communication System

INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION


Check CAN Communication System

1.CHECK SELF-DIAGNOSTIC RESULTS

CAUTION:
If CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which performs CAN communication.

With CONSULT-III
- Connect CONSULT-III, and turn ignition switch ON.
- Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
- Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
- Check display content in self-diagnostic results.





OK or NG
NO DTC IS DETECTED INSPECTION END
CAN COMM CIRCUIT [U1000] After printing "SELF-DIAGNOSIS RESULTS", go to "CAN SYSTEM", Refer to Precautions For Trouble Diagnosis
CONTROL UNIT(CAN) [U1010] Replace Intelligent Key unit.