Scan Tool Testing and Procedures
AUTOMATIC DRIVE POSITIONER
CONSULT-III Function (AUTO DRIVE POS.)
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
SELF-DIAGNOSIS RESULTS
Self-Diagnosis Results:
NOTE:
- CAN communication malfunction and detention switch malfunction are displayed on "TIME".
- If error is detected in the present, "CRNT" is displayed.
- If error is detected in the past (present error is not detected), "PAST" is displayed.
- If error has never been detected, nothing is displayed on "TIME".
- Any items other than CAN communication malfunction and detention switch malfunction are counted.
- If error is detected, error detection frequency is displayed from "1" to "127" on "TIME".
- If error has never been detected, nothing is displayed on "TIME".
- Can clear the detected memory.
Normal: Clear memory in normal condition, history is erased and nothing is displayed on "TIME".
Error: Clear memory in error condition, error is detected again and "1" is displayed on "TIME".
DATA MONITOR
ACTIVE TEST
CAUTION:
During vehicle driving, do not perform active test.
NOTE:
If active test is performed, reset seat memory and key fob interlock drive positioner after performing work.
WORK SUPPORT
The seat slide amount at entry/exit operation setting can be changed by CONSULT-III. Refer to System Description.