Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Check Mirror Motor Circuit
REVERSE INTERLOCK DOOR MIRROR SYSTEM
Check Mirror Motor Circuit
1.CHECK MIRROR MOTOR FUNCTION
With CONSULT-III
Check the operation with (MIRROR MOTOR RH, MIRROR MOTOR LH) in the ACTIVE TEST.
Without CONSULT-III
1. Turn ignition switch to ON position.
2. Check voltage between door mirror connector and ground.
OK or NG
OK - Mirror motor circuit is OK.
NG - GO TO 2.
2.CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect automatic drive positioner control unit connector and door mirror connector.
3. [Door mirror LH]
- Check continuity between automatic drive positioner control unit connector and door mirror LH connector.
- Check continuity between automatic drive positioner control unit connector and ground.
4. [Door mirror RH]
- Check continuity between automatic drive positioner control unit connector and door mirror RH connector.
- Check continuity between automatic drive positioner control unit connector and ground.
OK or NG
OK - GO TO 3.
NG - Repair or replace harness.
3.CHECK AUTOMATIC DRIVE POSITIONER CONTROL UNIT OUTPUT SIGNAL
1. Connect automatic drive positioner control unit connector.
2. Turn ignition switch ON.
3. [Door mirror LH]
Check voltage between automatic drive positioner control unit connector and ground.
4. [Door mirror RH]
Check voltage between automatic drive positioner control unit connector and ground.
OK or NG
OK - Replace malfunction door mirror actuator.
NG - Replace automatic drive positioner control unit.