Section 7: Verifying the Upgrade Result

SECTION 7: VERIFYING THE UPGRADE RESULT

^ When the map data upgrade operation is complete, confirm that the HDD navigation system is operating correctly.

^ Make sure the CF adapter is disconnected from the navigation system before performing the following steps.

1. Turn the ignition ON.

^ If the ignition is already ON, turn it OFF and then back ON.





2. The Program Loading screen as shown in Figure 7-1 will display.

^ This process may take only a few seconds to complete or it may take a few minutes.





3. Select MAP, then ENTER.

^ Make sure the navigation map displays and the system functions correctly.

NOTE:
You can confirm the new map version in the vehicle using the navigation screen; see ENTER below.





^ If the fail-safe screen is displayed as shown in Figure 7-3, the map data upgrade failed.

Turn the ignition OFF; return to the beginning of the Service Procedure and follow all steps again exactly as written.