Check Power Window Motor (Rear LH or RH) Circuit
POWER WINDOW SYSTEM
Check power Window Motor (Rear LH or RH) Circuit
1.CHECK POWER WINDOW SUB-SWITCH REAR OUTPUT SIGNAL
1. Turn ignition switch ON.
2. Check voltage between power window sub-switch (rear LH or RH) connector and ground.
OK or NG
OK - GO TO 2.
NG - Replace power window sub-switch (rear LH or RH).
2.CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window sub-switch (rear LH or RH) and power window motor (rear LH or RH) connector.
3. Check continuity between power window sub-switch (rear LH or RH) connector and power window motor
(rear LH or RH) connector.
OK or NG
OK - Replace power window motor (rear LH or RH).
NG - Repair or replace harness.