Outline of Laser Beam Aiming Adjustment Procedure

INSPECTION AND ADJUSTMENT


LASER BEAM AIMING ADJUSTMENT : Outline of Laser Beam Aiming Adjustment Procedure


CAUTION:
- The laser beam aiming adjustment cannot be performed without CONSULT-III.
- The laser beam aiming adjustment must be performed every time the ICC sensor is removed, installed or has been moved as a result of a collision.
1. Prepare the vehicle and the work area.
2. Set up the ICC target board. For details, refer to Technical Service Bulletin.

Tool number : KV99110100 (J-45718)

3. Adjust the sensor following the procedure on CONSULT-III.
4. Check system operation after the adjustment.