Front Door: Service and Repair

DOOR


Removal and Installation


FRONT DOOR

Removal

CAUTION:
- When removing and installing the door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating part for poor lubrication. If necessary, apply "body grease".
1. Remove the door window and module assembly. Refer to Service and Repair.
2. Remove the door harness.
3. Remove the check link cover.





4. Remove the check link bolt from the hinge pillar.
5. Remove the door-side hinge nuts and bolts, and remove the door assembly.






Installation
Installation is in the reverse order of removal.

REAR DOOR

Removal

CAUTION:
- When removing and installing the door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating part for poor lubrication. If necessary, apply "body grease".
1. Remove the door window and module assembly. Refer to Service and Repair.
2. Remove the door harness.
3. Remove the check link cover.





4. Remove the check link bolt from the hinge pillar.
5. Remove the door-side hinge nuts and bolts, and remove the door assembly.






Installation
Installation is in the reverse order of removal.

BACK DOOR

Removal

WARNING:
Always support back door when removing or replacing back door stays. Power back door opener will not support back door with back door stays removed.
1. Remove the back door glass. Refer to Service and Repair.
2. Remove the back door lock assembly. Refer to Door Lock Assembly.
3. Remove the rear wiper motor. Refer to Rear Wiper Motor.
4. Remove the back door wire harness.
5. Remove the rear washer nozzle and hose from the back door. Refer to Diagrams.

CAUTION:
Two technicians should be used to avoid damaging the back door during removal.
6. Support the back door.
7. Disconnect the power back door lift arm from the door.
8. Remove the back door stays.
9. Remove the door side nuts and the back door assembly.






Installation
Installation is in the reverse order of removal.