Third Row Power Folding Seat Will Stop Short of Its Fully Up or Down Position

THIRD ROW POWER FOLDING SEAT WILL STOP SHORT OF IT'S FULLY UP OR DOWN POSITION.


Third Row Power Folding Seat Stops Short of it's Fully Up or Down Position

1.PRELIMINARY CHECK
Perform preliminary check. Refer to Inspection and Adjustment.
Are inspection results normal?
YES - GO TO 2.
NO - Perform repairs as necessary.
2.CHECK HISTORY
Check to see if a previous normal seat folding operation was interrupted due to low voltage condition.
Was voltage interrupted?
YES - Perform learn procedure by operating affected seat until seat reaches full open/closed position.
NO - GO TO 3.
3.THIRD ROW POWER FOLDING SEAT MOTOR





1. Turn ignition switch OFF.
2. Disconnect third row power folding seat motor harness connector and third row power folding seat control unit harness connector.
3. Check continuity between third row power folding seat motor harness connector B403 (LH) or B426 (RH) terminals 1, 2 and third row power folding seat control unit harness connector terminals 10, 15 (LH) or 9, 15 (RH).






Is there continuity?
YES - Replace affected third row power folding seat motor. Refer to Exploded View.
NO - Repair circuits as necessary.