System Description

TPMS


System Description


BODY CONTROL MODULE (BCM)
The BCM is shown with the lower instrument panel LH removed. The





BCM reads the air pressure signal received by the remote keyless entry receiver, and controls the low tire pressure warning lamp as shown below. It also has a self-diagnosis function to detect a system malfunction.






TRANSMITTER
A sensor-transmitter integrated with a valve is installed in each wheel, and transmits a detected air pressure signal in the form of a radio wave. The radio signal is received by the remote keyless entry receiver.






REMOTE KEYLESS ENTRY RECEIVER
The remote keyless entry receiver is shown with the instrument panel RH removed. The remote keyless entry receiver receives the air pressure signal transmitted by the transmitter in each wheel.





COMBINATION METER
The combination meter receives tire pressure status from the BCM using CAN communication. When a low tire pressure condition is sensed by the BCM, the combination meter low tire pressure warning lamp is activated.






TIRE PRESSURE WARNING CHECK CONNECTOR
The tire pressure warning check connector can be grounded in order to initiate self-diagnosis without a CONSULT-III. The tire pressure warning check connector is located behind the lower portion of the instrument panel LH. Refer to Self-Diagnosis (Without CONSULT-III).





DISPLAY UNIT
Displays the air pressure of each tire.






NOTE:
After the ignition switch is turned on, the pressure values will not be displayed until the data of each wheel is received.