Cooling Fan

COOLING FAN


Diagnosis Procedure

1.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect IPDM E/R harness connector E120.





3. Check voltage between IPDM E/R terminal 22 and ground with
CONSULT-III or tester.

Voltage: Battery voltage

OK or NG
OK - GO TO 3.
NG - GO TO 2.
2.DETECT MALFUNCTIONING PART
Check the following.
- 40A fusible link
- Harness for open or short between IPDM E/R and battery
>> Repair open circuit or short to ground or short to power in harness or connectors.
3.CHECK COOLING FAN MOTOR CIRCUIT FOR OPEN OR SHORT





1. Disconnect cooling fan motor harness connector (1).
2. Check harness continuity between cooling fan motor terminal 2 and IPDM E/R terminal 24, cooling fan motor terminal 1 and ground. Refer to wiring diagram.

Continuity should exist.

3. Also check harness for short to ground and short to power.
OK or NG
OK - GO TO 4.
NG - Repair open circuit or short to ground or short to power in harness or connectors.
4.CHECK COOLING FAN MOTOR
Refer to Testing and Inspection.
OK or NG
OK - GO TO 5.
NG - Replace cooling fan motor.
5.CHECK INTERMITTENT INCIDENT
Perform How to Check Terminal and Intermittent Incident.
OK or NG
OK - Replace IPDM E/R. Refer to Service and Repair.
NG - Repair or replace harness connectors.