Intake Valve Timing Control Solenoid Valve (RH)

INTAKE VALVE TIMING CONTROL


Intake Valve Timing Control Solenoid Valve (RH)


REMOVAL
1. Remove drive belt. Refer to Removal and Installation.
2. Disconnect Intake valve timing control solenoid valve connector (RH).





3. Remove Intake valve timing control solenoid valve (RH) (3) from
Intake valve timing control solenoid valve cover (RH) (1).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Replace the O-ring (2) of the Intake valve timing control solenoid valve with a new one, then lubricate
O-ring with engine oil before installing.

Intake valve timing control solenoid valve bolt : 9.6 Nm (0.98 kg-m, 85 in-lb)