Low-Pressure Flexible Hose

LOW-PRESSURE FLEXIBLE HOSE


Removal and Installation for Low-Pressure Flexible Hose


REMOVAL
1. Remove the engine room cover using power tools.
2. Remove the engine air cleaner and air ducts. Refer to Removal and Installation.
3. Remove the cowl top extension. Refer to Service and Repair.
4. Discharge the refrigerant. Refer to Refrigeration System.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
5. Remove the low-pressure flexible hose.

INSTALLATION
Installation is in the reverse order of removal. Refer to Component.

CAUTION:
- Replace the O-ring of the low-pressure flexible hose with a new one, then apply compressor oil to it when installing it.
- After charging refrigerant, check for leaks.