Work Flow

DIAGNOSIS AND REPAIR WORK FLOW


Repair Work Flow


WORK FLOW





DETAILED FLOW
1.CUSTOMER INFORMATION
Interview the customer to obtain detailed information about the symptom.
>> GO TO 2
2.PRELIMINARY CHECK
Perform preliminary check. Refer to Preliminary Check
>> GO TO 3
3.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to Self-Diagnosis (With CONSULT-III) (with CONSULT-III) or Self-Diagnosis (Without CONSULT-III) (without CONSULT-III).
>> GO TO 4
4.SYMPTOM
Check for symptoms. Refer to Symptom Table.
>> GO TO 5
5.MALFUNCTIONING PARTS
Repair or replace the applicable parts.
>> GO TO 6
6.DRIVE TEST
1. Perform a drive test.
2. Check the low tire pressure warning lamp.
>> GO TO 7
7.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to Self-Diagnosis (With CONSULT-III) (with CONSULT-III) or Self-Diagnosis (Without CONSULT-III) (without CONSULT-III).
Are any DTC's displayed?
YES - GO TO 5
NO - INSPECTION END