In "P" Position, Vehicle Moves When Pushed

SYSTEM SYMPTOM


In "P" Position, Vehicle Moves When Pushed


SYMPTOM:
Even though the selector lever is set in the "P" position, the parking mechanism is not actuated, allowing the vehicle to be moved when it is pushed.

DIAGNOSTIC PROCEDURE
1.CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to Diagnosis System (TCM).
Do the self-diagnosis results indicate PNP switch?
YES - Check the malfunctioning system. Refer to P0705.
NO - GO TO 2.
2.CHECK CONTROL CABLE





Check the control cable.
- Refer to Checking of A/T Position.
OK or NG
OK - GO TO 3.
NG - Adjust control cable. Refer to Adjustment of A/T Position Checking of A/T Position, "Adjustment of A/ T Position".
3.CHECK A/T FLUID CONDITION
1. Remove oil pan. Refer to Service and Repair.





2. Check A/T fluid condition. Refer to Checking The A/T Fluid (ATF), "Checking the A/T
Fluid (ATF)".
OK or NG
OK >> INSPECTION END
NG - GO TO 4.
4.DETECT MALFUNCTIONING ITEM
- Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to Symptom Table (Symptom No. 58).
OK or NG
OK >> INSPECTION END
NG - Repair or replace damaged parts.