Check Trunk Lid Opener Cancel Switch

INTELLIGENT KEY SYSTEM


Check Trunk Lid Opener Cancel Switch

1.CHECK TRUNK LID OPENER CANCEL SWITCH
With CONSULT-III
Check trunk lid opener cancel sensor ("TR CANCEL SW") in "DATA MONITOR" mode.





Without CONSULT-III
1. Turn ignition switch OFF.
2. Check voltage between Intelligent Key unit connector and ground.










OK or NG
OK - Trunk lid opener cancel switch is OK.
NG - GO TO 2.
2.CHECK TRUNK LID OPENER CANCEL SWITCH CIRCUIT
1. Disconnect Intelligent Key unit and trunk lid opener cancel switch connector.
2. Check continuity between Intelligent Key unit connector and trunk lid opener cancel switch connector.










3. Check continuity between Intelligent Key unit connector and ground.





OK or NG
OK - GO TO 3.
NG - Repair or replace harness between Intelligent Key unit and trunk lid opener cancel switch.
3.CHECK TRUNK LID OPENER CANCEL SWITCH OPERATION
Check trunk lid opener cancel switch.










OK or NG
OK - GO TO 4.
NG - Replace trunk lid opener cancel switch.
4.CHECK TRUNK LID OPENER CANCEL SWITCH GROUND CIRCUIT
Check continuity between trunk lid opener cancel switch connector and ground.










OK or NG
OK - GO TO 5.
NG - Repair or replace trunk lid opener cancel switch ground circuit.
5.CHECK INTELLIGENT KEY UNIT OUTPUT SIGNAL
1. Connect Intelligent Key unit connector.
2. Check voltage between Intelligent Key unit connector and ground.










OK or NG
OK - Check the condition of harness and connector.
NG - Replace Intelligent Key unit.