Cluster Lid A
INSTRUMENT PANEL ASSEMBLY
CLUSTER LID A : Removal and Installation
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1. Remove instrument side finisher LH.
- Insert a remover into lower space.
- Pull the instrument side finisher LH crosswise.
Circle: Pawl
Triangle: Clip
2. Remove instrument driver lower panel.
- Remove hood opener mounting bolt. Service and Repair.
- Pull back.
- Disconnect harness connectors.
Circle: Pawl
Square: Metal clip
3. Remove instrument finisher A.
- Insert a remover into upper space.
- Pull back instrument finisher A.
Circle: Pawl
Triangle: Clip
4. Remove instrument finisher C.
- Insert a remover into upper space.
- Pull back instrument finisher C.
Circle: Pawl
Triangle: Clip
5. Remove cluster lid A.
- Pull back.
Triangle: Clip
INSTALLATION
Install in the reverse order of removal.