Removal and Installation

REAR SEAT


Removal and Installation


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

BENCH SEAT

Removal
1. Remove seat cushion.





- Pull the lock lever at the front bottom of the seat cushion forward (1 for each side), and pull the seat cushion upward to release the wire from the seat cushion hook, then pull the seat cushion forward to remove.
- Remove the seat cushion from the vehicle.
2. Remove seat back.
- Remove the nuts under seatback.
- Lift up seatback assembly from underneath, and then remove seatback assembly from seatback hook that is fixed to the vehicle.
- Remove the headrest.
- Remove the seatback from the vehicle.

Installation
Install in the reverse order of removal. Be careful of the following one point.
Securely engage the upper wire on the back side of seatback with seat hook.

POWER SEAT

Removal
1. Remove seat cushion side.





- Lift seat cushion side up, disengage the seat cushion hook, and then remove the seat cushion side.
- Remove the seat cushion side from the vehicle.
2. Remove the seat cushion center.
- Disconnect the harness connector.
- Remove the bolts, and then remove the seat cushion center from the vehicle.





3. Remove seatback side.
- Access to the back side of seatback side from the lower, and then pull the lock lever of seatback hook downward.
- Pull seatback side, and then remove seatback side from the seatback hook.
Circle: Seatback hook
- Lift up seatback side from underneath, and then remove seatback side from seatback hook.
- Disconnect the harness connector.
- Remove the headrest.
- Remove the seatback side from the vehicle.
4. Remove seatback center.
- Disconnect the harness connector.
- Remove the seatback center mounting bolts and nuts.
- Remove the seatback center from the vehicle.
5. Remove the rear seat frame.
- Disconnect the harness connector.
- Remove the bolts and nuts, and then remove the rear seat frame.

Installation
Install in the reverse order of removal.