VDC/TCS/ABS

SENSOR ROTOR


Removal and Installation


REMOVAL

CAUTION:
Do not reuse sensor rotor.

Front
- Sensor rotor cannot be disassembled. Remove the sensor rotor together with hub bearing assembly. Front Wheel Hub and Knuckle.

Rear
- Follow the procedure below to remove rear sensor rotor.
- Remove side flange. Disassembly and Assembly.
- Using a bearing replacer (suitable tool) and puller (suitable tool), remove sensor rotor from side flange.

INSTALLATION

Front
- Sensor rotor cannot be disassembled. Remove the sensor rotor together with hub bearing assembly. Front Wheel Hub and Knuckle.

Rear





- Follow the procedure below to install rear sensor rotor.
- Using a drift (SST), press rear sensor rotor onto side flange.
- Install side flange. Disassembly and Assembly.