Removal And Installation With ADP

INSIDE MIRROR


Removal and Installation


REMOVAL

Base model





1. Insert minus driver (A) under the inside mirror (1).
2. Slide the inside mirror to the upper side while pushing the pawl downward.

CAUTION:
Never use excessive force to remove the inside mirror because it is inserted tightly into the mirror base.

Option model
1. Remove the inside mirror cover.
2. Remove TORX bolt.
3. Disconnect harness connector.
4. Slide the inside mirror upward to remove.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
When inserting the inside mirror into the mirror base, be sure to push the pawl until it get connected to the mirror base.