Rear Seat

REAR SEAT

Disassembly and Assembly

SEATBACK

Disassembly
1. Remove the clips, and then pull out seatback board.

Circle: Clip

2. Remove the armrest.

- Remove the armrest hinge covers (1).

- Remove the arm rest mounting bolts (A), nuts (B) and hog rings (C), and then remove the armrest.
3. Remove the seatback device assembly.
- Remove the seatback trim fixing hog rings.
- Disconnect the seatback lock harness connector.

LH seatback
Disconnect the seatback lock harness connector (A).

RH seatback
Disconnect the seatback lock harness connector (B).

- Remove the seatback device.
Remove the seatback device mounting bolts (C).

4. Remove the hinge bracket mounting bolt (A), and then remove the hinge bracket (1).
5. Remove the seatback trim and pad.

- Remove the metal clips and pawls, and then pull out seatback lock cover.

Square: Metal Clip
Triangle: Pawl

- Remove the seatback hinge outer cover.

- Remove the seatback hinge.
Remove the seatback hinge mounting bolt (A).
- Turn seatback lock knob counterclockwise to remove.

- Push the seatback lock knob finisher pawl upward though the seatback pad and the seatback frame to remove it.

- Remove the headrest holder.

CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
- Remove the seatback trim and pad.
- Remove the hog rings to separate the seatback trim and seatback pad.

6. Remove the seatback lock assembly.
Remove the seatback lock assembly mounting bolts.
7. Remove the rear center seat belt. Exploded View

Assembly
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with the seatback frame.

SEAT CUSHION

Disassembly
Remove the hog rings to separate the trim and pad.

Assembly
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord with the seat cushion pad wire.