Driver Side

HEATED SEAT SWITCH INDICATOR:_:DRIVER SIDE





Description
Illuminates the indicator that indicates the operating status of heated seat.




Component Function Check
1.CHECK HEATED SEAT SWITCH INDICATOR FUNCTION
Check that the related indicator lamp illuminates when heated seat switch is turned ON.
Is the inspection result normal?
YES - Heated seat switch indicator function is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK HEATED SEAT SWITCH INDICATOR GROUND CIRCUIT
1. Turn ignition switch OFF
2. Disconnect heated seat switch connector.
3. Check continuity between heated seat switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace harness.
2.CHECK HEATED SEAT SWITCH
Check heated seat switch. SEE Component Inspection.
Is the inspection result normal?
YES - GO TO 3.
NO - Replace heated seat switch. Removal And Installation.
3.CHECK INTERMITTENT INCIDENT
Check intermittent incident. Intermittent Incident.
- INSPECTION END




Component Inspection
1.CHECK HEATED SEAT SWITCH
1. Turn ignition OFF.
2. Disconnect heated seat switch connector.
3. Set the heated seat switch ON.
4. Check continuity between heated seat switch terminals as follows.





*For a digital tester.

NOTE:
- Use a tester that can perform LED (light-emitting diode) measurement.
- The polarity (+ and �) reverses when checking using an analog tester.
Is the inspection result normal?
YES - INSPECTION END
NO - Replace heated seat switch. Removal And Installation.