Front Suspension

FRONT SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
1. Set front wheels in a straight-ahead position.
2. Place an iron bar or equivalent between transverse link or upper link and steering knuckle.
3. Measure axial end play by playing it up and down.

Axial end play : Refer to "Ball Joint" Front Suspension

CAUTION:
- Never depress brake pedal when measuring.
- Never perform with tires on level ground.
- Be careful not to damage ball joint boot. never damage the installation position by applying excessive force.

Shock absorber
Check for oil leakage, damage. Replace it if necessary.