Rear Suspension Assembly

REAR SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
1. Place an iron bar or equivalent between lower link or upper link and axle housing.
2. Measure axial end play by playing it up and down.

Axial end play : Refer to "Ball Joint" Ball Joint

CAUTION:
- Never depress brake pedal when measuring.
- Never perform with tires on level ground.
- Be careful not to damage ball joint boot. Never damage the installation position by applying excessive force.

SHOCK ABSORBER
Check for oil leakage and damage. Replace it if necessary.