Inspection After Removal

FRONT WHEEL HUB AND KNUCKLE


Inspection


INSPECTION AFTER REMOVAL
Check components for deformation, cracks, and other damage. Replace it if necessary.

Ball Joint Inspection
Check boots of transverse link and steering outer socket ball joint for breakage, axial play, and torque. Inspection and Testing and Inspection.

INSPECTION AFTER INSTALLATION
1. Check wheel sensor harness for proper connection. Exploded View VDC/TCS/ABS.
2. Check the wheel alignment. Inspection.
3. Adjust neutral position of steering angle sensor. Description Special Repair Requirement Description Special Repair Requirement, "ADJUSTMENT OF STEERING ANGLE
SENSOR NEUTRAL POSITION : Special Repair Requirement".