Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2011 >> EX35 RWD V6-3.5L (VQ35HR) >> Repair and Diagnosis >> Body and Frame >> Frame >> Subframe >> Front Subframe >> Service and Repair >> Removal And Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal And Installation





FRONT SUSPENSION MEMBER


Removal and Installation


REMOVAL
1. Remove tires with power tool.
2. Remove under cover with power tool.
3. Remove suspension member stays with power tool.
4. Separate steering gear assembly and lower joint. .
5. Remove steering outer sockets from steering knuckles. .
6. Remove wheel sensors and sensor harness from steering knuckles. Exploded View VDC/TCS/ABS Removal And Installation VDC/TCS/ABS, "FRONT WHEEL
SENSOR : Exploded View".
7. Remove stabilizer connecting rods and stabilizer bar. Exploded View.
8. Install engine slinger, and then hoist engine. Removal And Installation.
9. Remove transverse link from front suspension member. Exploded View.
10. Remove steering hydraulic piping bracket and steering gear from front suspension member. .
11. Set suitable jack front suspension member.
12. Remove mounting nuts between engine mounting insulator and from suspension member. .
13. Remove mounting bolts and nuts of front suspension member with power tool.
14. Gradually lower jack to remove front suspension assembly from vehicle.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Perform final tightening of bolts and nuts at the vehicle installation position (rubber bushing), under unladen condition with tires on level ground.
pro multis · About Operation CHARM