Selective Unlock Function Does Not Operate With Intelligent Key

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH INTELLIGENT KEY





Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
- Intelligent key is removed from key slot.
- All doors are closed.




Diagnosis Procedure
1.CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES - GO TO 2.
NO - Go to All Door.
2.CHECK "DOOR LOCK�UNLOCK SET" SETTING IN "WORK SUPPORT"
Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "DOOR LOCK-UNLOCK SET" of "WORK SUPPORT".
3.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.