Selective Unlock Function Does Not Operate With Door Request Switch Without Automatic Back Door

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH DOOR REQUEST SWITCH





Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow Without Automatic Back Door.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
- Intelligent Key is removed from key slot.
- Ignition switch is in the OFF position.
- No Intelligent Keys are inside the vehicle.




Diagnosis Procedure
1.CHECK DOOR LOCK FUNCTION
Check door lock function by door request switch.
Does door lock/unlock with door request switch?
YES - GO TO 2.
NO - - Go to Driver Side Without Automatic Back Door (driver side).
- Go to Passenger Side Without Automatic Back Door (passenger side).
- Go to Back Door Without Automatic Back Door (back door).
2.CHECK "DOOR LOCK�UNLOCK SET" SETTING IN "WORK SUPPORT"
Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT". CONSULT-III Function (BCM - Door Lock) Without Automatic Back Door.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".
3.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.