Without Navigation

RGB (B: BLUE) SIGNAL CIRCUIT





Description
Transmit the image displayed with AV control unit with RGB signal to the front display unit.




Diagnosis Procedure
1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front display unit connector and AV control unit connector.
3. Check continuity between front display unit harness connector and AV control unit harness connector.





4. Check continuity between front display unit harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - Repair harness or connector.
2.CHECK RGB (B: BLUE) SIGNAL
1. Connect front display unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check signal between front display unit harness connector and ground.





Is the inspection result normal?
YES - Replace front display unit. Exploded View Without Navigation.
NO - Replace AV control unit. Exploded View Without Navigation.