Inlet Port Memory Function Without ACCS

INSPECTION AND ADJUSTMENT


WITHOUT ACCS : Inlet Port Memory Function


DESCRIPTION
When ignition switch is turned from OFF to ON, inlet port can be set to AUTO or manual.

Operating procedures for this trimmer are as per the following:
1. Begin self-diagnosis STEP-5 mode. Diagnosis Description Unified Meter & A/C Amp Without ACCS.
2. Press fan (UP: +) switch to set system in auxiliary mode.
3. Press intake switch as desired.






NOTE:
When battery cable is disconnected or battery voltage is below 10 V, memory function is canceled. Memory function set becomes that of initial condition.