Rear Suspension Assembly

REAR SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
Measure axial end play by placing and moving up/down with an iron bar or equivalent between suspension arm and axle assembly.

Axial end play : Refer to "Ball Joint" Ball Joint

CAUTION:
- Never depress brake pedal when measuring.
- Never perform with tires on level ground.
- Be careful not to damage ball joint boot.

SHOCK ABSORBER
Check for oil leakage and damage. Replace it if necessary.