Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2011 >> FX50 AWD V8-5.0L (VK50VE) >> Repair and Diagnosis >> Body and Frame >> Frame >> Subframe >> Front Subframe >> Service and Repair >> Removal And Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal And Installation





FRONT SUSPENSION MEMBER


Removal and Installation


REMOVAL
1. Remove tire with power tool.
2. At first, remove the following parts as a set.
- Engine, transmission assembly, transfer and front final drive: Removal And Installation (VQ35HR), Removal And Installation (VK50VE).
- Drive shaft: Exploded View.
3. Remove the following parts.
- Steering knuckle and wheel hub and bearing assembly: Exploded View.
- Steering gear assembly and hydraulic line: Exploded View, (VQ35HR), (VK50VE).
- Stabilizer bar and stabilizer connecting rod: Exploded View.
- Transverse link: Exploded View.
- Engine mount insulator: Exploded View (VQ35HR), Exploded View(VK50VE).

INSTALLATION
Note the following, and install in the reverse order of removal.
- Perform final tightening of bolts and nut at the vehicle installation position (rubber bushing), under unladen condition with tires on level ground.
pro multis · About Operation CHARM